|
Page 1 of 2
| 02/11/08 - (Events & Trade Shows) UMC Exhibits at Gulf South Rotating Symposium |
UMC Automation & Compression is pleased to announce that it will be attending the Gulf South Rotating Machinery Symposium in Batorn Rouge, La. This event is held March 3rd - 5th and features the top manufacturers of gas compressors in the world.
UMC will be featuring the Utile rotary vane compressor while also highlighting our automation systems and ASME vessel capabilities.
Come visit UMC at the GSRMS March 3rd - 5th. Booth #317. |
| 03/01/07 - (Product News) UMC Gains ASME Accreditation |
UMC Automation & Compression is proud to announce that company has received the acceditation from the ASME Board for the "U" and "R" Stamps.
These certifications authorize and solidify UMC's capabilities and quality control procedures to engineer, build, and repair ASME Code vessels, tanks, and separators.
UMC President Thomas Gentry stated, "We have worked diligently within this market over the past year, and this falls right into our expansion plan to be establish UMC as a leader within this industry by the middle of 2007."
UMC specializes in building small to mid-range vessels, tanks, and separators while also providing first-class repair facilities.
For mroe information call UMC at 432-524-2456. |
| 11/29/06 - (Company News) UMC to be featured in a number of Media Articles as a result of market resurgence |
UMC Automation & Compression is slated to be featured in a number of media articles over the next 60-days.
The seletion for these articles is a direct reflect of UMC's market resurgence and leadership over the past year.
Look for UMC to be featured in the Permian Basin Petroleum Association (PBPA) Monthly Newsletter, Compressor Tech Two as a "Mover and Shaker" for 2007, RF Design as a focus story on the new technoligcal advances UMC has launched over the past several months that utilize cutting edge technology, as well as the American Oil & Gas Reporter referencing LACT technology.
UMC President, Thomas Gentry stated, "It is truly an honor for our organization to be recognized as a leader in the oil & gas industry. We have a very unique position to offer our customer's value based solutions to many of their engineering problems while increasing their profits. The entire staff of our organization has worked diligently to provide cutting edge technology and knwoledge based solutions for all of our customer's needs."
UMC's featured articles will be posted on www.umcautomation.com as they are published. |
| 10/20/06 - (Company News) UMC General Manager Named President |
UMC Automation & Compression General Manager Thomas Gentry was named President of the company during a meeting on Monday.
Mr. Gentry has been with UMC since the end of 2004, and has been heavily involved with the company's restructuring and resurgence back into the domestic and international markets. Further, Mr. Gentry has been heavily involved in the Engineering and Project Management in a number of domestic and international packages as well as heading up all international sales efforts.
"I am honored and truly proud of the team that we have developed over the past (2) years here at UMC. It is really great to say that we have compiled one of, if not the most, experienced teams within our industry. We have come a long way, but still have a long way to go to be where we want to be. I feel privleged to have the opportunity to lead the company into the future as we seek to achieve these goals." Gentry said.
Mr. Gentry stepped into his new position just one day before the Permian Basin International Oil Show which Mr. Gentry called a great success.
Looking into the future, Mr. Gentry stated, "UMC has a number of new endeavors on the horizon including the receipt of our new ASME stamp which will spring us into new markets and a further diversification of our business. Through all of this, the team at UMC will continue to excel and provide great benefits to all of our customers." |
| 10/09/06 - (Events & Trade Shows) UMC Announces Compression Seminar |
UMC Automation & Compression, an industry leader in the vapor recovery and compression field is pleased to announce our sponsorship of the largest vapor recovery and compression seminar ever to be held in the Permian Basin.
This seminar will be held concurrently with the Permian Basin International Oil Show on October 17, 2006 at the MCM Grande Hotel located at 6701 E. Business 20 in Odessa, Texas. During the event you will have the opportunity to hear and interact with many of the world’s most respected compressor manufacturers and their engineers or founders. The list already includes:
Tim Poole Utile Engineering Company (Rotary Vane) England
Lonnie Shelton Liquid Ring Recovery Systems Pampa, Texas
Gemini (Reciprocating)
Leroi (Rotary Screw)
You will have the opportunity to speak with these guests and learn the distinct differences between these different type compressors along with the pros and cons of each style. Also, hear about proper maintenance and required service along with little known secrets about these products.
Often, you would have to attend 5 – 6 seminars to get this information. However, you can get it all here in an easy to understand and fun format. Lunch will be served from noon to 1:30 and the seminar will go from 1:30 to 4:00. This will be followed by a networking reception, dinner, and open bar from 4:00 – 7:30 P.M. Door prizes including a $500.00 cash prize will be given away at 7:00.
Please R.S.V.P for this rare opportunity and great time by Thursday, October 5th to Amanda Bradley at UMC by calling 432-524-2456 or e-mailing amanda@umcautomation.com.
Should you be unable to attend please feel free to send other representatives from your company in your place. We look forward to seeing you there for a great afternoon and fun evening!
|
| 05/22/06 - (Company News) UMC Vapor Recovery Article Appears in the May Issue of the American Oil & Gas Reporter |
The American Oil & Gas Reporter's May issue on Gas Compression Technology features a UMC written story focusing on the economics of vapor recovery units.
UMC was chosen to write the article after the company was noticed as one of the faster-moving companies in the compression and vapor recovery industry.
The Vapor Recovery article co-authored by UMC's General Manager, Thomas Gentry, and Houston-Based Murex Petroleum's Sr. Petroleum Engineer, Dustin Faulkner, focuses on the the economic advantage of vapor recovery systems.
The American Oil & Gas Reporter is the largest oil & gas circulation magazine in the U.S., and copies can be downloaded by Clicking Here. UMC will also post the article on their website in the very near future. |
| 05/01/06 - (Product News) UMC Named Sole Domestic Distributor for Utile Compressors |
The Great Britain based Utile Engineering Company has named UMC Automation & Compression as their sole distributing agent in the United States and Russia.
Utile manufactures top-of-the-line rotary vane compressors that are installed throughout the world.
Utile General Director Tim Poole stated, "UMC had a solid plan moving forward and a new direction that provides Utile with the best opportunity to succeed in a mutually beneficial forum."
UMC will be working toward establishing domestic distributors throughout the U.S. to make the Utile compressor readily available in many regions of the U.S..
UMC General Manager Thomas Gentry added, "The Utile/UMC partenership is yet another great step for our fast-moving company. Utile makes a well-known great product, and UMC is proud to be a partner with them."
For more information on Utile compressors or UMC Automation & Compression please call 432-524-2456. |
| 04/22/06 - (Company News) American Oil & Gas Reporter invites UMC to write an expert article on Vapor Recovery |
Editors at the American Oil & Gas Reporter have invited UMC Automation & Compression to offer their expertise in an article scheduled to appear in the May, 2006 issue.
The article will be featured in the Gas Compression Technology portion of the magazine. UMC General Manager Thomas Gentry stated, "This is a wonderful opportunity for UMC to expose spme of our expertise when it comes to vapor recovery systems. The articly also continues to solidfy our stance as the leader in Vapor Recovery Systems throughout the world."
UMC will feature the article on their website at http://www.umcautomation.com once it is published. |
| 04/02/06 - (Company News) UMC Announces Promotion of Dickie Brown to Operations Supervisor |
UMC Automation & Compression is pleased to announce the promotion of Mr. Dickie Brown to Operations Supervisor.
Mr. Brown will be promoted from his current position of Applications Engineer and Project Manager. Mr. Brown has over 20 years of experience in the design and fabrication of LACT and VRU systems.
UMC General Manager Thomas Gentry stated, "Dickie has displayed all of the attirbutes that will insure his success in this new position. We are pleased to have him as a member of our management team and I geatly look forward to working with him much more closely in his new role." |
| 12/19/05 - (Company News) Russian Engineers Attend Training at UMC |
UMC Automation & Compression hosted (4) engineers and their interpreter December 3rd - 10th. The group came from TATEX, a Russian company in Tartarstan.
During their training, the engineers studied new and innovative devices to be utilized on vapor recovery units. The engineers also spent a large portion of their time gaining knowledge on UMC's new automation products and capabilities.
President & CEO of UMC Automation and Compression Jim Waldroop stated, "This school was really a turning point for us in regards to our Russian business and we knew it had to be top notch"
During their time at UMC, the attendees were involved in classes hosted by companies from England and the United States.
|
|
|
|
|
|
|
